Show Guide Ad Form/Specifications

Artwork deadline: Tuesday, March 1, 2022
Payment deadline: Tuesday, March 1, 2022

Ad size	Dimensions	Black/White	CMYK Color
Inside Back Cover	Trim: 8.267″ width x 11.692″ height Bleed: 8.157″ width x 11.942 height	—	TBD
Backside of One Divider (limited availability)	Trim: 8.267″ width x 11.692″ height Bleed: 8.517″ width x 11.942″ height	—	TBD
Two-Page Spread**	Trim: 16.534″ width x 11.942″ height Bleed: 16.784″ width x 11.942″ height	—	TBD
Full Page	Trim: 8.267″ width x 11.692″ height Bleed: 8.517″ width x 11.942″ height	TBD	TBD
Half Page	Trim: 8.267″ width x 5.846″ height Bleed: 8.517″ width x 6.096″ height	TBD	TBD
Quarter Page	Trim: 4.1135″ width x 5.846″ height Bleed: 4.3835″ width x 6.096″ height	TBD	TBD
Logo by listing	Trim: 4.1135″ width x 5.846″ height Bleed: 4.3834″ width x 6.096″ height	TBD	TBD

One free color logo by company listing for any ad purchased. Logo should be .EPS, high-res PDF or .AI format

Ads should be sent at 100 percent of mechanical requirements according to size of advertisement purchased, Turbomachinery Laboratory (TL) reserves the right to adjust or decrease size of advertiser’s materials to fit this size if needed.
Ads should be in .EPS, .PDF or .PSD format with at least 300 dpi and CMYK color format.
Ads should include a .25-inch bleed all around with a .5-inch gutter.
Ads can be set up vertical or horizontal.
Ads must be submitted by due date via email. Any necessary fonts or graphics that correspond with the advertisement should accompany the ad on the submittal email.
All ads are subject to approval of the Turbomachinery Laboratory. We reserve the right to reject, at our discretion, any ad deemed objectionable, whether for subject matter, graphics, phraseology or intention. The advertiser and advertising company assume liability and responsibility for all content of ads printed.

Show Guide Advertisement Request: